Blasphemous Blade - Elden Ring

🔧 Update 4/29/2026 — Printability Improvements

This print profile has been updated to improve FDM printability and overall print success.

What changed:
✅ Reoriented the model for better print stability  
✅ Fixed and improved the support setup  
✅ Remodeled parts of the blade to remove many of the thin, stringy details that were causing print issues  
✅ Reduced print speed significantly for better detail and reliability  
✅ Updated the profile to 0.12mm layer height  

The model is scaled as a miniture, but you can scale it up or down depending on your display or cosplay needs.

⚠️ A1 / A1 Mini note:
If you are printing on an A1, A1 mini, or another bed slinger, I recommend keeping the reduced speeds. You can lower the speed further if needed, especially if you notice movement, wobble, or support issues during the print.

This model is inspired by the Blasphemous Blade from Elden Ring. It is designed as a decorative display piece or cosplay prop. The design keeps the dark fantasy style of the original weapon while making some detail adjustments to improve FDM printability.

🔹 Features
✅ Elden Ring inspired Blasphemous Blade design  
✅ Remodeled for cleaner FDM printing  
✅ Improved orientation and support setup  
✅ Scalable for display or cosplay use  
✅ Great for painting, weathering, and display  

📌 Print notes
• Check scale before printing  
• Make sure your build plate is clean  
• Use the included print profile for the intended orientation and support setup  
• For A1 and A1 mini users, slow the print down further if needed  
• This is a decorative PLA prop, not intended for swinging or impact use  

• If you run into any issues, please let me know so I can keep improving the file again if needed :)
• If you print it, sharing your make would be amazing and really helps support future models.