Mikey Diabólico Hueforge
Print Profile(1)
Description
Boost Me (for free)
If you like this model, give me a boost; this will help me create more free models for you!
Project: mikey Diabolico.hfp
Print with 100% infill, 0.08 mm layer height, and a 0.24 mm base layer.
The model measures 161.76 x 200 mm.
You may print with higher layer heights, below the minimum depth of 0.48 mm.
The maximum depth is 3 mm and the actual depth is 2.6 mm.
Filaments used:
PLA Smart Recycled Black (Transmission distance: 0.5)
PLA Winkle Ash Grey (Transmission distance: 5.9)
PLA Smart Recycled White (Transmission distance: 11)
This print utilizes 3 unique filaments.
Swap instructions:
Begin with the black filament.
At layer 6 (0.64 mm), switch to Ash Grey.
At layer 14 (1.28 mm), switch to White for the remainder.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (9)