Synology NAS - Rattling noise suppression
Print Profile(4)
Bill of Materials
Description
Boost Me (for free)
I usually don’t ask for this, but I’ve noticed that many creators actively encourage it on other platforms—and it makes sense, as it helps increase visibility. So, if you can follow me, it would make difference. It’s a great way to support my work and show appreciation. For more insight subscribe my blog at: https://designrepcom.com/ This design is freely available for the community, but if you enjoy my work and would like to show your support, you can boost this project. Thanks!
Important notice:
Please consider following me if you download and print my work. It’s a simple way to support my activity and stay connected with me in the future. Your interest helps me understand the value of my work to the community. Thank you!
Introduction
As stated on the summary, this works very well for the rattling sound coming from the chassis.
I would also like to point out that this was not done randomly. I did a study and tried several drawings until I came to the solution that I show you here.
This representation shows that a load of 10N aprox 1kgf will result on a deformation of about 0.35mm, The imagem shows an amplification of the real displacement (better do understand)
Instructions
It is composed of 2 systems: a tensioning system for drive bays and a damping system for the feet's.
you will find 2 kind of damping system for the feet's.
- Flex spring_soft - For NAS up to 4 bay (tested with a 920+ model - Don't know about others…);
- Flex spring. STEP - For NAS with more than 4 bays.
If, like me, I had a little double-sided adhesive foam, you can put some at the base of each foot. It won't do much about the noise, but it helps to keep your feet in place and in the installation of them.
Conclusion
Did this help?
For me, absolutely, especially the combination of the two systems. Obviously I can hear the drivers spining and the reading head, that noise the drive would always make even if it was resting inside a cotton ball.
Curious About My Tools? Check This Out!
For those of you who often ask about the tools I use to bring ideas to life, this article, The Journey From Idea To Object (Part I), offers some insights into the initial stages. It highlights the use of various tools, including software like Autodesk Fusion for CAD design, Blender for render and Bambu Studio for 3D printing preparation, and other... So, if you're curious about the software and hardware too, that I've incorporate in my workflow, take a look at the link for more details!" – Visit https://designrepcom.com/ for much more.
License
Comment & Rating (181)