Quick Point Marking Ruler
Print Profile(1)
Description
Installing shelves in home cabinets can be very time-consuming if you measure one by one. Ensuring consistent height, depth, and right angles is challenging; marking a single point requires two measurements, which is quite laborious. So I made this ruler. Resting it against the cabinet, the bottom aligns with the outer edge, providing a precise 5cm distance. The same 5cm distance is maintained when placed against the inside of the cabinet. I marked every 5cm on the ruler for quick location identification; simply mark with a marker pen.
The ruler is connectable; the shortest length is 22cm, with each segment measuring 20cm. The maximum length is 120cm when connected, which is sufficient for all heights in my home. This length should be adequate for most situations; if not, simply print more extension rulers
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)