Timless-Plain socket insert cover for Busch-Jaeger

Do you have electrical installation with a older switch range from Bush-Jaeger® at your home that doesn't fit to your modern furnishings?
Are you bored about the everyday same design?
Do you want to bring bright colors in your home?

Just print it for little money!
You can find the whole Timeless-Plain series in my collection.

This timeless plain design fits for most Busch-Jaeger® switch ranges like Reflex SI, art linear®, axcent®, balance®, Duro 2000®, and some more.

You still need the sockets, switches and inserts from Busch-Jaeger®, you can only print the frames, rockers, socket insert coverss and cover plates.

Timless-Plain socket insert cover for most Busch-Jaeger® switch ranges

Note:

• The two parts of the socket insert are put together with some force, but a few drops of glue certainly won't do any harm.
• You need the power outlet and the mounting screw from the original!
• I recommend printing the parts with ASA or ABS, e.g. the bambu ABS GF gives you a nice matte finish.

I frequently receive inquiries about printing problems with various print profiles created by other Makerworld users.

Unfortunately, I have no control over the profiles that other Makerworld users upload to my models (Neither the geometry nor the print settings). 

While these are often well-intentioned, they are not maintained, and the results are sometimes unsatisfactory.

Therefore, I strongly recommend using only the print profiles marked "Designer". I can only provide support for these!