Openwork Sci-Fi BMCU Bracket Adapter

I greatly appreciate HAN@23BNHX8's tablet stand design; I modified the connector to use his stand for my bmcu setup

Download the complete stand here:

HX8 iPad Stand by HAN - MakerWorld

Please read the following instructions before printing:

1.Completely cover the two green surfaces shown in the image below with 3M nano double-sided adhesive tape to connect the bmcu

The nano double-sided tape adheres exceptionally well; there's no need to worry about it detaching.

2.A bolt hole is incorporated into the connector for added strength. An M3 bolt and nut can be inserted to prevent interlayer separation

3.My printer rests on a metal shelf. To prevent the stand from shifting, I embedded magnets in the four feet of the stand.

Considering most users' printers aren't situated on metal surfaces, I recommend securing the feet with nano double-sided tape to prevent the bmcu from being dragged by the PTFE tube during printing.