Toggle Clamp Fixture for 3/4" Dog Holes

Toggle clamp fixture for Bora MFT table.  Post is 19.6mm for snug fit in ¾" dog holes. You will need a ¼-20 bolt, washer and nut to secure it down to the MFT table.  Designed for toggle clamp with 33X19mm hole pattern.  Use drywall screws or similar.  Screw pilot holes are 3mm.  When removing the fixture from the MFT table it is necessary to drop the bolt out of the post and push the post up from the bottom of the table.  If you try to pull the bolt upwards to remove the post, it will flare the bottom and possibly damage the table surface.  Printed in PLA with 3 walls and 25% infill for adequate strength.  If this model is useful to you, please give me a five star rating and a boost!

Here is a link to all my models for Bora and Festool MFT table dog holes

https://makerworld.com/collections/6811266