Yor Forger Fangs / Needle Weapon
Print Profile(1)
Description
Yor Forgers iconic needle weapons!
Print takes a little over 3h. Make sure to reduce the print speed after ⅔ of the print to keep the best quality for the needle part
Easy to assemble.
Use of glue is necessary!
Assembly:
Just use the small connector piece to connect the two needle pieces. Put some glue in the connector holes to seal the pieces.
Next you put the glue on the surface area of the needles connection point that connects the handle and the needle.
Press the second connector into that cavity.
The handle has a bottomeless hole and one hole with a reachable surface.
Put glue at the surface of the handle part and attache the ring element. Use a little more glue since you will probably want to swing it ;)
Now put glue on the inside walls of the handle and apply it generous to the surface.
Lastly, push the needle into the socket.
Afterwards, you can easily sand it or simply paint it like we did.
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (10)