PARKSIDE Adapter for PSTDA JigSaw and PSS1C2 Track
Print Profile(1)
Description
Adapter for Parkside Jigsaw and Track
This adapter lets you use your Parkside jigsaw (PSTDA 20-Li B3) together with the Parkside guide track (PSS 1 C2). It helps you make long, straight cuts much easier.
You can simply click your jigsaw into the frame. After that, you can lock the adapter to your saw by placing the small plate in the front opening and tightening the screw on your jigsaw. If you've lost the screw, the adapter will still hold the saw fairly well using the built-in locking feature in the print. However, using the small plate is strongly recommended, as it locks much more securely.
Once the jigsaw is attached to the adapter, you can smoothly slide it along the track and make super straight cuts.
Don’t forget to set your jigsaw to speed level 1, 2, or 3.
- A higher level means the saw will cut faster,
- But the cut will not be as clean.
That’s why level 1 is best if you want a very nice, clean cut in wood or boards.
Also, make sure to use the right saw blade for the material:
- For parquet flooring, use a special parquet blade that cuts upwards.
- For regular wood, use a coarse blade.
- For metal, use a very fine blade.
Good luck! I hope you really enjoy using your jigsaw with the track and get great results with it.
Oh, and please use my profile if you want it to be strong. I don't know why some people complain, but some say the print is not strong enough… Maybe use a good brand PLA for it, dry it before printing or…
Link to the circular tracksaw adapter here:
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (28)