Wanke Cloud Built-in Hard Drive OneCloud Print Enclosure

This is a Onecloud built-in hard drive print design, smaller than the original, just enough to fit a 2.5-inch hard drive

Requires M2*8 self-tapping screws, M3*5 screws, M3 nuts, and a hard drive adapter board

This is the adapter board used in the picture The hard drive adapter board does not require a specific model, a smaller one will do

This model can be re-created but not for commercial use Please adhere to this voluntarily

echo "usb-host" >/sys/class/leds/onecloud\:blue\:alive/trigger 
echo "cpu" >/sys/class/leds/onecloud\:green\:alive/trigger 
echo "mmc1" >/sys/class/leds/onecloud\:red\:alive/trigger