Build plate holder x10
Print Profile(1)
Description
Build plate holder x10 v4
Layer height
0.16 first layer. 0.2 each next
Use your favorite filament colors, the effects will definitely be interesting.
Here I used light blue and gray. Both colors are matte.
Supports are not needed.
Ironing off (in my case).
holder
I rotated the holder 45 degrees so that the lines of the upper layers run in the right direction:
panels L & R
pins 2.8x2.8x6mm x12
The pins aren't really necessary, but I liked the option so I did and they helped with the precise fit.
First, we glue the pins to the side panels:
Then glue (be careful not to use too much glue) the panels with pins to the holder one by one.
Each time, give the parts time to connect.
Lucky you.
You just made yourself a build plate holder.
Happy printing
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (22)