HackMan3D

cover

plate_1.png

Capture d’écran 2024-01-10 à 12.49.50_8041b682-9642-423c-beef-0f2baffc82da.webp

plate_1.webp

0.2mm layer, 2 walls, 15% infill

gcheung55

IMG_5586_359e52ff-fa6c-451f-a558-7292be32a9eb.webp

IMG_5587_8d44d41a-1610-4619-85aa-fb3dcc738026.webp

Printed with PETG. The designer profile was too fast on the axe-in model and caused defects at the higher sections.<ul><li>0.2mm layer</li><li>2 walls</li><li>15% gyroid infill</li><li>Inner/Outer/Inner wall order</li><li>Improve print quality on axe-in, a thin and tall model by lowering speed on the object</li></ul>If opening with orca-slicer, you can select the brim type as “mouse ears” to reduce the amount of filament.

0.2mm layer, 2 walls, 15% gyroid infill, improved quaity for axe-in model

Accurate 3D Services

IMG_0140_fbce82b7-53f1-47ee-98e8-03ab29f7b9d7.webp

Same as the original, but tested on my A1 Mini. I recommend printing on silent mode to avoid the tall pin becoming stringy at the top.

A1 Mini Tested - 0.2mm layer, 2 walls, 15% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

Simply print this tool to help you to maintain your extruder.

Extruder Maintenance Tool

ASIA

Print Profile(3)

Description

Comment & Rating (177)

License

Related Models