Caterpillar Next Gen Logo with Magnet - w/wo AMS
Print Profile(2)
Description
Disclaimer: This model is intended strictly for personal entertainment only. Selling this model or utilizing it for any commercial purpose is explicitly prohibited.
======
This is the CAT's new logo. You can find it on all of the CAT's next-generation machines!
This logo requires two 4mm x 2mm magnets, allowing it to be attached to any metal surface, such as a whiteboard, cabinet, or refrigerator.
You can buy the magnet in bulk on Amazon for a few dollars. The GIF below shows you how to hammer it in easily.
The first print profile is the AMS version, I highly recommend use this one if you have AMS. It won't waste too much of your filament, but it will save you a lot of time!
The second profile is a non-AMS version, featuring 0.5 mm cuts in each base and a 0.1 mm gap between each part, to help you assemble and locate the parts more easily. You can snap the parts in, but I suggest gluing them in.
If you're using Bambu Lab filament, the CAT yellow is closer to either PLA Basic Sunflower Yellow (10402) or ABS Tangerine Yellow (40402).
Thank you for being a Caterpillar customer, dealer, employee, or CAT lover! Have fun!
Documentation (1)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (8)