AMS 2 Desiccant Box (no Spool Removal required)
Print Profile(6)
Bill of Materials
Description
This dessicant box for the AMS 2 Pro can be inserted or removed without removing the Spools, unlike most other variants.
Slide down the bigger box first and push towards the front, then insert the smaller box behind.
In the Print Profiles you'll find Options with and without a Hygrometer (Only round Option, since the rectangular Version is to wide for the AMS 2).
It should fit any regular sized Round Hygrometers and has multiple Slots for different clip orientations. This one was used by me:
https://www.amazon.de/dp/B088NN6WY6
Designed to max out the volume of desiccant, while not using to much material and be easy to use / print.
Fits about 300 g of Desiccant (100 g per Slot).
Update:
Added a Print Profile with Boxes for the Side Slots
Fillament:
If you print only PLA, it's fine to print the Boxes from PLA.
If you use the Drying Funktion of the AMS 2 for higher Temp Materials, i'd recommend printing the Boxes in PETG.
Boxes for the Original AMS (1) can be found here:
https://makerworld.com/en/collections/2653153-ams-desiccant-boxes
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1839)