SilverTriple

cover

2024-01-12_nv8qivsrk2wp.jpg

2024-01-12_dutfqui9flqq.jpg

2024-01-12_x5vr7baanqrd.jpg

2024-01-12_yryq4ldtduhn.png

plate_1.png

image05.jpeg

I used PLA CF for enhanced rigidity. the filament used is Creality PLA CF for its beautiful dark green colour.

PLA-CF 0.2mm layer, 2 walls, 15% infill

image04.jpeg

After printing initially in 0,2mm layer, I discovered that even normal PLA is strong enough for the part, if you print it with an 0,8mm nozzle. I used GEEETECH dark green, since it works with the colour combination of my DT03 car.The layer height is 0,48mm, a good cobination of speed (6 minutes print time) and material use (3,69grams).

0.8mm nozzle, 0.48mm layer, 2 walls, 15% infill

<h2>Summary</h2>Designed this part to be used with led buckets. Its a simple part that goes around the U which fixes the front train on the DT03.Any led buckets can be used with this part.

Tamiya DT03 Front Led buckets holder

ASIA

Print Profile(2)

Description

Summary

Comment & Rating (0)

License

Related Models