Christine movie sign

Christine 1983

I continue to share my movie signs (other movie genres will also appear in the future).

Today I invite you to print “Christine” 1983 movie sign.
Dimensions after printing and connecting:
250x48x15mm
Filament colors I used: black, red, white, blue, support filament, and, optionally, red silk.

frame
black, red, support filament
 

The frame should be printed with the support option enabled. 
I used a support for pla from Bambu, but if you don't have one, you can also use PETG as support filament for pla instead.
layers 0.16mm and 0.2mm (or o.16 and 0.08). Ironing could be used, choice is yours. I prefer it off.

bg
black, blue, red, white
 

You can ignore any warnings that the printout needs a support. Of course, the support option turned off.

First layer 0.16mm, each subsequent 0.04mm.  Yes: 0.04mm
Ironing off
change of filament on layer:
1-62 black

63 white

64-67 blue

68 white

69-86 red

87-90 white

91 blue

92-272 white

Christine logo
white, black, red

First layer 0.16mm, each subsequent 0.4mm
Ironing off
change of filament on layer:
1-100 white

101-125 black

126-162 red

frame option
red silk, black, red, support filament

The frame option should be printed with the support option enabled. 
I used a support for pla from Bambu, but if you don't have one, you can also use PETG as support filament for pla instead.
layers 0.16mm and 0.2mm (or o.16 and 0.08). Ironing could be used, choice is yours. I prefer it off.

Each time, wait for the plate to cool down, and only then remove the printout from it.

When I printed this sign, everything matched the first time. It will probably be the same for you.

Happy printing