Five-port explosion-proof head clamp

After using the AMS BMCU, the five-port was always blown off. I searched the platform and couldn't find any suitable accessories. The suitable ones also require corresponding screws to fix them, so I drew this clamp myself. The principle is to directly clamp the fixed buckle below, so it will not be pushed open, and the five-port will not be pushed out. The clamp has two sizes, corresponding to M2 and M3 screws respectively. This accessory has no requirements for the screw length, as long as you have screws and nuts, you can use them. The picture shows that I only have screws and hot-melt nuts, so I modified it slightly. Of course, if you also have hot-melt nuts, you can directly tighten them and they will not loosen.