Anchoring Stake with Rope Lock
Print Profile(3)
Description
A barrel-head stake designed to allow for a rope/strap/guy-line to be easily tensioned and then securely locked in without tying a knot. Simply pass the line through barrel, draw the line tight, and then pull it into the slot along the side to lock it in place. Secure it by then wrapping it around and pulling across the slots on the opposite end. If you want to further secure the line you can also run the line back through the barrel and slot it a second time.
This has been carefully designed so that no supports are required, and two different lengths are provided. The shorter (22 cm) version can be printed on smaller print beds (e.g. an A1 Mini), and a longer (28 cm) version which requires a larger print bed (e.g. an X1/P1/A1).
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (65)