Victorinox Classic SD tick remover & toothpick

If you like to spend time outdoors (with or without a dog) and, like me, don’t really use the toothpick on your pocket knife, then you should replace the toothpick with this handy tick remover! 

Features:

• Perfect fit - just like the original toothpick
• Snaps in place with a satisfying click
• Printed with a closed end for stability - can be folded or cut in half to use on larger ticks
• Can still be used as a toothpick (albeit a bit wobbly one)
• Regular toothpick included
• Can be re-used or easily replaced
• Can be printed with a 0.4 nozzle, or 0.2 for detail
• Quick print and low material
  • Only 0.25g!
  • 7 min print with 0.4 nozzle
  • 10 min print with 0.2 nozzle
• Prints well in both PLA and PETG

I recommend printing a few extras while you’re at it! 

Step file available in STL/CAD files.

I printed on the Supertack cool plate and they stuck perfectly even without a brim (except for 0.2 in PETG). If using a different plate, I’d recommend adding a little brim since the parts are very small.