Printednest Bird Feeder 4.5
Print Profile(2)
Description
All about this projects: Birdfeeder 4.0 and Birdfeeder 4.5
Video assembly instructions:
!!! Information for the fine print: This model does not need supports. Use our 3mf file. We put a large brim for better adhesion of the print. If you are using stl file, add at least a 40mm brim in your print setup. At the same time, it does not speed up printing to a higher speed than is set. make sure the PEI sheet is properly cleaned and for better adhesion use a spray or whatever you are using !!!
Update 28/1 - This model should not be a problem to print without support. Anyway, since we see that some of you have a problem printing this model, we are adding ready-made 3mf profiles with added supports. They are tree-like and set on critical spots.
More info about on our Youtube Channel
facebook: https://www.facebook.com/printednest
Printednest Makers | 3d Print Group: https://www.facebook.com/groups/printednest
twitter: https://twitter.com/printednest
instagram: https://www.instagram.com/printednest/
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (532)