Counting Coil Winder
Print Profile(1)
Description
Hi,
This is my Counting Coil Winder. I needed to make some coils for an experiment so I came up with this. There are three counting gears three linking gears and the main drive gear. The main drive gear is rotated by cranking the crank handle. It will work on the base or you can just grab it in a vice for stability. I added in one of my coil forms so you can use it or adapt it to the coil shape you are after. I will add a reel of it to my insta shortly.
https://www.instagram.com/reel/DJHwLvCCc_1/?igsh=aXJxbHVlMDR1ZDUy
Happy coiling!
Purchaced components:
2 x M10 shouldered bolts 75mm
10mm radial bearing 8mm thick
2 x 10mm thrust bearings
M10 washers x 2
M10 repair washer 38mm
6 x M4 x 10mm
2 x M4 x 18mm
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (5)