Tiltable and Removable Drawer for Küpper Pegboard

Drawers S/M/L/XL tiltable and removable for Küpper pegboard

This is a flexible drawer/storage system for Küpper pegboards

The drawers are two-part: the drawer itself and the holder that hangs into the pegboard

There are 4 different sizes S, M, L, and XL, each with a tall and a shallow version of the drawer

If you choose the shallow version of the drawers, you can arrange the holders directly one above the other on the pegboard; the drawers can then be pulled out and also removed. With this variant, more drawers fit on the pegboard

If you choose the tall version of the drawer, you must arrange the holders with some distance between them, but then you can also use the built-in tilting mechanism and tilt the drawer by approximately 45 degrees after pulling it out. Of course, the drawer can also be removed in this variant

By the way, the shallow drawers can also be tilted if you arrange the holders with some distance between them

The tall drawers can also be arranged directly one above the other, but in that case, they can neither be tilted nor removed

The drawer is removed when tilted by tilting it slightly back and pulling it out diagonally forwards and upwards

Without the tilting mechanism, the shallow drawers, when extended, can be removed by slightly lifting them and then pulling them out forwards

For printing, I recommend using Support for the overhangs. Care must be taken to completely remove the supports, as otherwise, the drawer's movement may be impaired

Here is a list of the capacities of the drawers:

S shallow: 146ml

S tall: 182ml

M shallow: 241ml

M tall: 301ml

L shallow: 336ml

L tall: 420ml

XL shallow: 433ml

XL tall: 540ml

Also check out my other matching holders for a Küpper pegboard:

“Screwdriver Holder for Küpper Pegboard”

“Screwdriver Bit Holder for Küpper Pegboard”

“Makita 18V Battery Holder for Küpper Pegboard”

Knipex Pliers Holder Küpper Pegboard

Crimping Pliers Holder Küpper Pegboard

Drill Bit Holder 1-13mm Küpper Pegboard

Battery/Rechargeable Battery Holder and Dispenser Küpper Pegboard

Customizable Universal Holder Küpper Pegboard

You don't have a Küpper pegboard but an Ikea or Element System one?

I have also created suitable holders for those

Have fun printing!