Furniture Corner Foot or Slider 3x3x2 inch

This is a 3x3x2" corner foot, which could probably also be used as a lower friction slider.  It is attached with 5 #8 wood screws.  I used it to raise a spa step a bit off the ground, to keep the wood from getting wet.  This is not a heavy duty furniture foot, and does not provide much rise, since that was not required for my application.  The foot is designed with drainage holes, but use your best judgement on whether or not it will work for any particular application.

I printed mine in PETG.  There is a 1 plate 3mf profile for Bambu Studio attached, which is set up to print with the following settings:

• 4 walls with 60% rectilinear infill 
• 6 bottom shell layers

Other Stuff:

You can find the other things I'm working on at my blog here. You can also follow me here or on Printables to see what new stuff I post. If you would like to support my work, you can Buy Me A Coffee using this link:

https://www.buymeacoffee.com/mystoopidstuff

Thanks for looking!

Changelog:

5/2/2025: Uploaded to MakerWorld.