NAUTICA Watch Strap Adapter

Hello everyone!

Years ago, I was gifted a NAUTICA watch, model A17062G. With use and the passage of time, the original strap broke.
Unfortunately, NAUTICA stopped producing replacement straps for that watch. I was desperate; I had a beautiful watch that I couldn't wear. Among the universal straps, there was nothing that fit perfectly.
Then I remembered I had a 3D printer! :D
And so I designed and printed the adapter that perfectly follows the lines of the watch, harmonizing it with universal straps.
The adapter was designed for universal straps with a width of 22 mm (it seemed to me the best compromise).

I chose one with a Kevlar finish (the one shown in the photos) that most resembled the original.
I hope it can be useful to someone!

I printed the adapter in black PET-G with a 0.2mm nozzle (it has rather small details, I don't know if it will come out as well with larger nozzles); they were printed with the side face resting on the plate; adhesion increased using a brim and tree supports minimized.

Greetings!

PS: The adapter fits very precisely into the watch's housing and must be inserted from the battery side outwards. To attach the strap, it is better to use the original pins as they are the right length. The strap fastening also holds the adapter in place