charlie designs

cover

tempImagezBjQPD.jpg

tempImageVmC5Px.jpg

plate_1.png

2025-05-03_34250c1dc8461.jpg

Normal/Basic

Arn Prints

IMG_0439.png

Mod to the holder to create one where the blade can be replaced, will need 5mm x 2mm magnets and possibly superglue to hold them in place.

Magnetic Blade Holder -0.2mm layer, 5 walls, 25% infill

Valinn

2025-05-03_08631727604b4.webp

Scaled down to %70 to fit on build plate

0.2mm layer, 5 walls, 25% infill

Base with Line Contrast

Oringal Blade Holder with Pause

plate_2.png

Replaceable Magnet Holder 5mm x 2mm magnets

plate_3.png

Fizz

Paper cutter 2.jpeg

Paper cutter.jpeg

signal-2025-12-19-115839_003.jpeg

signal-2025-12-19-115839_004.jpeg

Screenshot 2025-12-19 115321.png

I’ve added color to the lines to improve contrast and help with alignment. Note: Some of my lighter color choices don&#39;t pop as much as expected, so feel free to swap them for higher-contrast colors in your slicer. I’ve also included two versions of the blade handle—the original and the magnetic version—on separate plates so you can choose your preferred style.

Added Color lines for Contrast 

DerGary

PXL_20250601_191350246.jpg

This is a wider version of the cutter so that DINA4 Paper can also be cut vertically. As this is a large print You need at least a Bambu Lab H2D printer or something comparable like an Creality K2 Plus.&nbsp;Apart from the size increase it prints like the original with the same settings.<ul><li>0.2mm layer</li><li>5 walls,</li><li>25% infill</li></ul>

300mm wide, cuts DINA4 wide,0.2mm layer, 5 walls, 25% infill

R0R03D

Captura de pantalla 2025-05-18 012545.png

0.16mm layer, 2 walls, 15% infill

Anton

tempImage3gWqET.jpg

IMG_1043.jpeg

IMG_1039.jpeg

IMG_1041.jpeg

IMG_1037.jpeg

IMG_1038.jpeg

IMG_1049.jpeg

<h3>Original full size – adapted for A1 Mini</h3>This model has been adjusted to fit the A1 Mini build volume.&nbsp;The main plate is split into three parts and needs to be glued together after printing. Use the smaller plate for alignment when assembling – this is important to ensure that the rail moves smoothly while still staying firmly in place within the hinges.&nbsp;The rail itself is unchanged from the original model, but has been reoriented for printing so it fits the A1 Mini build volume. Supports are added for it to be printable. I recommend using 50% print speed on this part, but normal speed should be ok as well.&nbsp;Assembly is required once all parts are printed.&nbsp;The cutter design is unchanged from the original. It is designed to stop at the correct position so you can easily insert a standard 18mm snap blade, just like the original model.&nbsp;<h3>Assembly</h3>Note that the cutter will stop mid print, and you will have to insert a 18mm snap blade (like the original).<ol><li>Print all parts.</li><li>Put it all together and check how snug the plates should be glued. The rail should have a rather tight fit, but still be movable.</li><li>Glue the three plate pieces together (put the other parts to the side at the moment). Squeeze it beween a flat surface and something heavy (some books etc.) for it to become flat.</li><li>Wait according to glue drying time.</li><li>Snap the rail into place.</li><li>Put the cutter on and start cutting!</li></ol>

A1 Mini - Full size original version

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<h3>Sliding Paper Cutter</h3>Need clean, straight paper cuts? This one&#39;s for you.Designed for 18mm snap-off blades. If you&#39;re looking to reuse old filament cutter blades instead, check out this version: 🔗 <a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/en/models/1242448-sliding-paper-cutter#profileId-1263254">Alternate Blade Model</a>&nbsp;🛠️ Assembly Tip: Pause your print at layer 104, insert the blade into the cutout, then resume printing. Be careful—those blades are sharp! Use pliers if needed.&nbsp;❌ Not Cutting? The blade might be backwards. Flip the slider to the other side and test again.&nbsp;📦 Want more prints like this? Check out my Patreon: <a target="_blank" rel="noopener noreferrer ugc" href="https://patreon.com/c/charliedesigns">patreon.com/c/charliedesigns</a>

Sliding Paper Cutter (18mm Snap blades)

ASIA

Print Profile(7)

Description

Sliding Paper Cutter

Comment & Rating (229)

License

Related Models