Peloton Bike+ Power Brick Organizer/Wall Hanger v2

Update: New AC Plug.. 1/14/26

• Thanks to a gracious user for pointing out to me that there is more than one AC plug in the wild and the radius on the corners of it is tighter.. Because of the snug fit this model has with the plug, that radius change means this other plug won't fit! Please see the pictures below to see what plug you have and which profile you should print. Both models are identical other than the plug hole. Thanks!

Original Print Profile - Linetek Plug	“New Plug” Print Profile - Volex Plug (tighter radius)

Update: New Version 2! 

• Almost half the filament use of V1. Now just 26g and more sleek.
• Improved cable clip with catches and recess to more securely hold the power wire.

A stylish and functional power brick holder/organizer for your Peloton Bike+. This securely holds the power brick and allows you to hang it from the outlet that the adapter is plugged into. Clip to hold the extra AC power cable at the bottom.

Very simple, no assembly. Just unplug the AC cable from the brick, place the brick in the holder, and plug the AC cable back into secure the brick in place. Coil up the cord as pictured in carefully press into the clip at the bottom (You may need to use a zip-tie to keep it together). Insert the wall plug through the opening at the top and into your outlet to hang it.

• No supports
• ~1:08 to print. Variable layer height for optimum quality.

• Should print fine with any PLA or PETG (as pictured is Bambu Lab Sunflower Yellow)