Cable Tie / Tie Organiser Reusable Tidy 40-205mm

A simple reusable tie fastener to organise cables and other long objects. It features 1-12 holes with lengths 40-205mm for great versatility. Unlike other cable ties, this puts ease of use first, with a simple fastening and unfastening mechanism. Reinforced “T” part helps ensure it doesn't come loose.

Works well with PLA filament due to reinforced “T” end, TPU/PETG untested. If you're using PLA please note its still a bit brittle, its recommended to not bend too much or use it round very thin cables as it may snap. If you're using TPU, you may need to thicken the design in cura or other software before printing

SIZE GUIDE:

Use this for an approximate idea as to what cable tie size you should print for different cable lengths.

~1m phone cable = 85mm-115mm

~2m phone cable = 115mm-145mm

~3m phone cable = 145mm-175mm

1m HDMI cable = 130mm-160mm

PRINT SETTINGS:

0.2mm Layer height

3 Outer walls

3 inner walls

No build plate adhesion needed, if print isn't adhering to bed, increase bed temp and lower print speed.