TANK Spool Box

TANK spool box

Run out of Bambu fuel?
Don't worry, you've got your tank to refuel!

VIDEO → HERE you can see it in action

TANK

Keeps your spools away from moisture thanks to its insulating seal

I used this one:
https://amzlink.to/az0au6cdazQht

At the bottom of the TANK there is a compartment dedicated to silica gel, which is loaded from the back via a threaded funnel.
Its cap features an insulating seal.

On the front I have added a round humidity indicator, also equipped with an insulating sheath, as is the closing edge of the box.

You can customize the labels you will need to understand which filament is inside the box or in your AMS
(see below)

MINI-TANK 

It's the themed container for your labels;
you can specify the type of content with a dedicated label and it won't look out of place next to its bigger sibling!
During assembly, the lid should fit snugly; in the photos you see it is exactly like that, but if your tolerance is higher you can fix it with glue.
The dummy cap screws on and the box opens and closes thanks to magnets.

AMS LABEL

When using your spool, you can move the labels from the box to the AMS thanks to the support that attaches to it.
It has been designed to be stable and to allow viewing of the AMS humidity indicator.
 

LABELS

There are two types of labels:
the longest ones are shared between TANK and AMS, the shorter ones for the MINI-TANK.
… but don't worry, they are in two different printing profiles ;)

The texts are customizable by selecting the "edit text" item within Bambu Studio

How to use them
Personally, on the TANK I like to indicate the brand, the type of filament and a label printed directly with the filament in question.
I then printed 3 Mini-Tanks to hold the three different types of unused or spare labels.

You are of course free to customize them as you wish; if you feel like it, post me a photo with the result of your cataloging system.

… and if you feel like it, check out my modular filament cataloging system ;)