Print Profile(1)
Description
Boost Me (for free)
Enjoyed this model? Pleas follow, check out my other models and consider giving a boost as this is the best way to support my work and helps me create more free designs. Thank you!
Membership
Print. Sell. Profit. Unlock commercial rights to sell physical prints of my designs while supporting future creations!
Remixed a model of a croc to have a voronoi texture on the top section. I have 4 variations of the voronoi but the first one (on the first two plates) is the easiest to print. While 95A TPU will work, I don't recommend it. It is still too hard. I used 85A and it was much more comfortable. If you are willing to spend the money, 70A is the best TPU for footwear, as it is strong, durable but soft. If you do print with anything at or softer than 85A, it is imperative that you feed the filament directly into the extruder without PTFE tubing from above. Remove the glass top (if you are printing on a P1S) and use a spool holder that provides zero resistance. If you feed it through the PTFE tubing, it could cause the TPU to stretch ever so slightly and result in poor print results. Something like this… https://www.printables.com/model/715271-bambu-p1s-top-spool-holder/comments (not my design but there are others on makerworld).
This remix is based on
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (11)