osVAC neo M32 to H35 adapter for 35mm Kärcher hose

I acquired a Kärcher suction hose extension which, unlike the hose included with my Kärcher vacuum cleaner, possesses a 35mm, not a 32mm, inner diameter. Consequently, I designed this M32 to H35 adapter.

Note: The initial five centimeters of the aforementioned Kärcher hose lack threading; therefore, this section must be removed to attach the osVAC adapter.

Should you encounter difficulty detaching the retaining ring, consider printing this tool or employing a strap wrench.

Consult the documentation for comprehensive details regarding the osVAC neo system.

---

I purchased a Kärcher suction hose extension, but unlike the hose that came with my Kärcher vacuum cleaner, this one has an inner diameter of 35mm instead of 32mm. Therefore, I created this M32 to H35 adapter.

Note: The first 5cm of the mentioned Kärcher hose is unthreaded, so you need to cut it off to connect the osVAC adapter.

If you have problems loosening the retaining ring, print this tool or use a strap wrench.

Refer to the documentation for more information on the osVAC neo system.