osVAC neo F32 to H35 adapter for 35mm Kärcher hose

I acquired a Kärcher suction hose extension and unfortunately, it does not feature a 32mm hose like the one included with my Kärcher vacuum; instead, it has a 35mm inner diameter. Therefore, I designed this F32 to H35 adapter.

Note: the initial 5cm of the aforementioned Kärcher hose is unthreaded, so you must trim it to accommodate the osVAC adapter.

Should you encounter difficulty loosening the slip ring, consider printing this tool or employing a strap wrench.

Consult the documentation for comprehensive details regarding the osVAC neo system.

---

I purchased a Kärcher suction hose extension, but unlike the hose provided with my Kärcher vacuum cleaner, this one has an inner diameter of 35mm instead of 32mm. For this reason, I created this F32 to H35 adapter.

Note: The first 5cm of the aforementioned Kärcher hose lacks threading; therefore, this section must be removed to connect the osVAC adapter.

If you experience difficulties in loosening the rotary ring, print this tool or utilize a strap wrench.

Refer to the documentation for further information on the osVAC neo system.