mikalos

cover

1000086067.jpg

1000086070.jpg

1000086069.jpg

1000086066.jpg

1000086071.jpg

plate_1.png

2025-05-09_f3b4de69441a18.jpg

No stand

1000092301.jpg

1000092300.jpg

1000092299.jpg

1000092303_(2).jpg

1000092305_(3).jpg

Finally designed the stand for the case. The model need just little support for the slot where the stands goes inI recommend to use use a different filament for the interface, if you print in PLA, use PETG or support for PLA, if you use PETG use PLA or support for PETG. if you want to print without it you probably will have to clean that part otherwise the stand won t slot in properly in a rest position and keep popping out. Tell me if you need to make the model ready for you i can add a print profile with that settings. If you want to print straight as it is i suggest using a Flat head blade for taking off that part of interface that get stuck, as in the pictures, and works great.&nbsp;Printing: smaller layer give better dimensional result, so I reccomend 0.12. I used smooth plate or you can have same result with cool track.

With Stand

The hard part at the back of the spigen rugged case got broken so i made it again, without stand. I instead downloaded a stand and glued it on. from now you can have a totally customizable look for the case, from color to any writing!!&nbsp;<h2>Update: I uploaded the new Replica Version of the back case. I left some inctruction for the printing, read the description before print</h2>

Samsung s21 ultra spigen rugged case esternal part

ASIA

Print Profile(2)

Description

Update: I uploaded the new Replica Version of the back case. I left some inctruction for the printing, read the description before print

Comment & Rating (7)

License

Related Models