Print Profile(1)
Description
Boost Me (for free)
Boosts help me to make more designs like this. If you enjoy this poster, please consider giving me a quick boost! :)
Hueforges can be resized by adjusting only the X and Y scale—leave the Z height unchanged for best results.
Hueforge art inspired by the cryptid legend of Mothman and the eerie charm of Appalachia.
A stylized travel-poster take on Weird, Wonderful West Virginia, this design blends paranormal folklore with Van Gogh-inspired visuals. From mysterious mountains to glowing eyes in the dark, it's a tribute to the state's most iconic legend.
These prints display wonderfully with a 3d printed HueForge stand, such as the middle size shown here:
https://makerworld.com/en/models/153050-3-collapsable-stand-sizes-hueforge-etc?from=search#profileId-167215
Full Credit to @Lumpy3D for inspiring me to finally bite the bullet and put some of my creations out there.
Project: WeirdWonderfulMothmanWV.hfp
Print at 100% infill with a layer height of 0.08mm and a base layer of 0.16mm
The Model is 133.33x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max Depth is 2.24mm and the Actual Depth is 2.24mm
Filaments Used:
- PLA PolyLite Black – Transmission Distance: 0.3
- PLA+ Sunlu Blue – Transmission Distance: 4
- PLA BambuLab Basic Pumpkin Orange – Transmission Distance: 5.5
- PLA eSun Basic White – Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
- Start with PolyLite Black
- At layer #10 (0.88mm) swap to Sunlu Blue
- At layer #12 (1.04mm) swap to BambuLab Basic Pumpkin Orange
- At layer #19 (1.6mm) swap to eSun Basic White for the rest
License
Comment & Rating (20)