Helical Gear Fidget Spinners
Print Profile(3)
Description
This is a helical gear fidget spinner
This can be printed multi colour without an AMS as it is printed as parts and then assembled.
*** Please make sure you are using the latest version of Bambu Studio or the print profile settings will not be set and it may not fit together properly and may not work as expected ***
Assembly instructions
Start with the frame piece below
Then start putting the 3, 4 or 5 matching gears on on the posts (depending on the spinner you have printed)
Put one of the posts with for the centre gear in place from the bottom
Put the centre gear in place
Press the gear onto the post. This will need a little bit of force.
Put the other frame piece loosely on the top and add the second gear post
Press the 2 posts together into the centre gear
Now squeeze each of the frame parts together in turn working around the fidget spinner.
Again this may require a little force as this is a tight friction fit.
Once it is together it should spin freely
Like this model? Here are some ways to help support my work:
Please check out my other designs
Please consider supporting me at Buy me a coffee
Please remember to follow me
Boost Me (for free)
If you like my designs, a boost would be very much appreciated
Membership
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (62)