Search models, users, collections, and posts
Virpil Throttle and CP Mount
IP Report
Print Profile(1)
0.2mm layer, 6 walls, 25% infill
Designer
15.2 h
5 plates
Open in Bambu Studio
Boost
12
31
8
4
27
8
Released
Description
These are mounting brackets for the Virpil CM2 and the Virpil Control Panel to stand on the desk. The parts are printed with ASA but recommend 25% infill (Gyroid) and at least 3 outer walls.
The stabilizer part can also be printed with PETG.
M5x12mm pan head screws with lock nuts are used for screwing.
The lower plate can be screwed to the throttle with M6x16mm pan head screws.
The other .3mf files are attached.
Plate Nr.5 should be printed from TPU and then Glued to the base. To put the Parts together, I used M3 and M5x12mm Screws with Nuts
Link: https://www.amazon.de/gp/product/B083R4PKBW/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (8)