Gift box (No AMS required)
Print Profile(1)
Description
I used this gift box for giving away a baptism gift for my friend.
The inside volume of the default box is approximately ~ 120x150x60mm but is of course scalable.
Generic PLA setting should work fine at 0.2m layer height. The only change I did to default settings was changing to gyroid infill.
The print will require some cleaning of support material, but it's manageable.
It should snap together just fine, if not-, applying some glue is suggested.
Friendly reminder to tick automatic support (normal) for the files that require this!
Suggestions/changes is always welcome
Boost Me (for free)
Boosting is always appreciated, never expected. It works as a good motivation for me to keep sharing my files as I mostly print stuff for personal needs.
Thanks in advance!
Best regards
David
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (29)