Geegeez

cover

20250511_181619081_iOS.png

20250511_181348870_iOS.png

pound-in_edging_graphic.png

20250511_181249457_iOS.png

20250511_181143736_iOS.png

20250511_181148811_iOS.png

Pound-in Edging

plate_1.png

Connectors

plate_2.png

2025-05-11_b25e78007bbc3.png

<ul><li>0.28mm layer height (0.2mm is okay as well)</li><li>No supports required</li><li>Brim ears are recommended</li></ul>

0.28mm layer, 2 walls, 15% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<h2>Pound-in Edging for Lawn and Garden</h2><boostme><boosttitle>Boost Me</boosttitle><boostcontent>If you like this model, please consider giving it a boost! It really helps to encourage me to support the community!</boostcontent></boostme><h2>Summary</h2><p>These are pound-in edgings for surrounding a garden bed or a border around a soiled area. Perfect for small plant gardens for decorative purposes. It&#39;s super easy to install in the ground, all you need is a mallet!  They&#39;re meant to connect together in straight lines with a simple sliding mechanism. However, you can also fit them together at 90-degree angles with simple “L&#34; and “T” connectors.</p><p>&nbsp;</p><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000001407468/design/2025-05-11_01a29fccd6edf.png"></figure><p>Each interlocking piece measures 170mm wide by 165mm high (6.7&#34; x 6.5&#34;). Using a rubber mallet, you hammer each piece into the ground, interlocking it with the previous piece. Installation couldn&#39;t be simpler, and it&#39;s easy to stagger the top level for going up hills (something you cannot do easily with conventional edging).</p><p>&nbsp;</p><p>For making corners or multiple sections, you can print the “L” or the “T” connectors on the second plate that use the same simple sliding mechanism to connect the pieces.</p><h2>Preparation &amp; Printing</h2><ul><li>Tested with Ele-goo PETG.</li><li>A 0.4mm nozzle with the 0.28mm layer height (Extra Draft) setting is fine. Of course, you can print at 0.2mm as well.</li><li>No supports are required.</li><li>Brim ears are recommended due to printing vertically.</li><li>Print as many copies as you need that will fit on the plate.</li></ul><h2>Assembly</h2><ul><li>Simply slide the pieces together. Easy!</li><li>A rubber mallet is needed for pounding into the soil. It should go in relatively easily unless your soil is more like hard clay.</li></ul>

Pound-in Edging for Lawn and Garden

ASIA

Print Profile(1)

Description

Pound-in Edging for Lawn and Garden

Summary

Preparation & Printing

Assembly

Comment & Rating (71)

License

Related Models