58mm Double-Hole Badge Protector Case

This is a protective case for 58mm double-hole badges. It needs to be assembled by yourself and requires the purchase of necessary accessories. Materials required for assembly: 10 round magnets with a diameter of 2mm and a thickness of 2.5mm, and transparent plastic sheets with a thickness of 0.5mm. When assembling, 4 magnets are needed for both the top and bottom covers, installed in the four corners and in the middle of the box (the positions have been marked). If necessary, a 2mm diameter drill bit may be used to enlarge the holes. The transparent plastic sheets need to be cut to the same size as the top cover. When installing the transparent plastic sheets, they must be installed on the side with magnets!!! (If installed backward, the internal space will become larger, affecting the state of the badge inside the box). My homepage also has 58mm single badge protectors and 75mm single badge protectors!!!