叫老龚就好

cover

截屏2025-05-14 23.44.36_副本.png

DSC01631.JPG

DSC01627_(1).jpg

DSC01638.JPG

plate_1.png

plate_2.png

plate_3.png

plate_4.png

plate_5.png

需拓竹声光套件02版本及灯带

Requires Bambu Lab Sound and Light Kit V02 and LED strip

Lightsaber Version - Not for Swinging

分开打防炒面

plate_6.png

2025-05-14_be453513cea868.jpg

使用铝条加强结构，可使用荧光耗材打印A1打印需小心倾倒

Structure can be reinforced with aluminum strips, printable with fluorescent filamentA1 prints require careful handling to prevent tipping

Standard Version - Wieldable

Sword Base

Sword Mid

Sword Tip

Crossguard+Ring

Crossguard

Grip

1.jpg

2.jpg

3.jpg

Screenshot 2026-02-05 at 10.41.10.png

Screenshot 2026-02-05 at 10.41.30.png

Screenshot 2026-02-05 at 11.40.01.png

<ol><li>使用逐件打印，为外观质量没有使用Brim，打印版涂胶实测可完美打印</li><li>务必先打印黄色配件盘！！！</li><li>为更好外观，手柄零件打印过程设置两次暂停，分别手动放入图示两个黄色圆环，最终手柄部分一体成型，无接缝</li><li>剑身零件整合连接件，增加强度并减少后期拼装步骤</li><li>修复手柄零件内部一段中空结构</li><li>整体耗材量减少40%，打印时长减少36%</li><li>安装步骤参考原模型</li></ol>

<ol><li>Print piece by piece, for aesthetic quality no brim was used, testing with glue on the printing plate showed perfect prints</li><li>Be sure to print the yellow accessory plate first!!!</li><li>For a better appearance, the handle part print process is set to pause twice, manually insert the two yellow rings shown, resulting in a seamless, single-piece handle</li><li>The blade part integrates connectors, increasing strength and reducing subsequent assembly steps</li><li>Fixed a hollow structure inside the handle part</li><li>Overall filament usage reduced by 40%, print time reduced by 36%</li><li>Refer to the original model for assembly steps</li></ol>

Optimized structure for the regular version, saves time and material, be sure to read the configuration description

Crossguard & Ring

two-tone Blade Base

two-tone Blade Tip & Mid

0.jpg

c.png

d.png

5.jpg

6.jpg

7.jpg

a.png

4.jpg

b.png

8.jpg

<ul><li>Remove all metal strips and adopt fully-filled printing. This drastically reduces the weight of the blade while maintaining satisfactory structural strength of the finished part.</li><li>No brim is used for superior surface finish; test prints show the coated printing plate delivers flawless printing results.</li><li>Print the gold accessory tray first, mandatory!!!</li><li>For optimal appearance, configure two pauses during the printing of grip components. Manually insert the two yellow rings shown in the diagram at each pause respectively. The grip will be formed as an integrated single piece with no visible seams upon completion.</li><li>Lay out split blade components flat for printing. This enables dual-color blade production with minimal material waste—only one material swap per tray (either via ASM or manual switching). It also eliminates print failures caused by excessive part height.</li><li>Snap features are added to all guard components for easier assembly and reduced hollow cavities in the model.</li><li>Total material consumption: only 300 grams; total print time: 8.5 hours.</li><li>Follow the original diagram for assembly steps: assemble the blade segments first, then join the full blade body together.</li><li>The sample shown in the illustration is printed with Bambu PLA glow filament.</li></ul>

Dual-color blade, no aluminum strips required

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>感谢支持 </boostcontent></boostme>该模型源自中国动漫“凡人修仙传”中韩立的本命法宝，名为青竹蜂云剑。根据动漫外形绘制复刻而来，望各位道友喜欢。模型分为光剑版和普通版：光剑版：        <a target="_blank" rel="noopener noreferrer ugc" href="https://store.bambulab.com/products/motion-activated-sound-and-light-props-kit">体感声光道具套件02 - ZC010</a> 和 <a target="_blank" rel="noopener noreferrer ugc" href="https://store.bambulab.com/products/led-light-strip-256rgb-5050led-815mm">LED灯带-256RGB-5050LED-815mm（1PCS）- KA010</a>        胶水（粘合模型）    <figure class="media"><oembed url="https://www.bilibili.com/video/BV1tjefzjEgZ/?spm_id_from=333.1387.homepage.video_card.click&amp;vd_source=f1b6368a803efe637cccfe646e3057c7"></oembed></figure>&nbsp;普通版：        4*15*850 铝条一根       胶水（可粘合铝合金与打印模型）      金色渗线液（涂画辟邪神雷，非必须）<figure class="media"><oembed url="https://www.bilibili.com/video/BV1CYECzsEV8/?spm_id_from=333.1387.homepage.video_card.click&amp;vd_source=f1b6368a803efe637cccfe646e3057c7"></oembed></figure>更多优质模型关注老龚B站账号，B站小店链接：https://b23.tv/3rKI0Rp<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000001418786/design/1e7bcfd0e785e7e4.png"></figure>&nbsp;

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>Thanks for supporting </boostcontent></boostme>This model is based on Han Li's destiny magic weapon, named Green Bamboo Bee Cloud Sword, from the Chinese anime "A Mortal's Journey to Immortality". It was recreated based on the anime's appearance. Hope fellow Daoists like itThe model is divided into a lightsaber version and a regular versionLightsaber Version        <a target="_blank" rel="noopener noreferrer ugc" href="https://store.bambulab.com/products/motion-activated-sound-and-light-props-kit">Motion-activated sound and light props kit 02 - ZC010</a> and <a target="_blank" rel="noopener noreferrer ugc" href="https://store.bambulab.com/products/led-light-strip-256rgb-5050led-815mm">LED Light Strip - 256RGB-5050LED-815mm (1PCS) - KA010</a>        Glue (for bonding the model)    <figure class="media"><oembed url="https://www.bilibili.com/video/BV1tjefzjEgZ/?spm_id_from=333.1387.homepage.video_card.click&amp;vd_source=f1b6368a803efe637cccfe646e3057c7"></oembed></figure>&nbsp;Regular Version        One 4*15*850 aluminum strip       Glue (can bond aluminum alloy and printed model)      Gold panel liner liquid (for painting the Evil-Repelling Divine Thunder, optional)<figure class="media"><oembed url="https://www.bilibili.com/video/BV1CYECzsEV8/?spm_id_from=333.1387.homepage.video_card.click&amp;vd_source=f1b6368a803efe637cccfe646e3057c7"></oembed></figure>For more high-quality models, follow Old Gong's Bilibili account. Bilibili store link: https://b23.tv/3rKI0Rp<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000001418786/design/1e7bcfd0e785e7e4.png"></figure>&nbsp;

Immortal Cultivator - Green Bamboo Bee Cloud Sword

ASIA

Print Profile(4)

Bill of Materials

Description

Comment & Rating (15)

License

Related Models