hueforge Airen Qiao tralalalalero tralalala Zenless Zone Zero
Print Profile(0)
Description
Project: 艾莲tralalalero tralalala.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x181.34mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA Chrominal Shadow Gray Transmission Distance: 3
PLA+ IIID Max Night Gray Transmission Distance: 0.8
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 4
PLA PolyLite Azure Blue Transmission Distance: 3
This print uses 6 unique filaments
Swap Instructions:
Start with Jade White
At layer #9 (0.8mm) swap to Shadow Gray
At layer #13 (1.12mm) swap to Night Gray
At layer #15 (1.28mm) swap to Black
At layer #17 (1.44mm) swap to Red
At layer #23 (1.92mm) swap to Azure Blue for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)