Bambu Lab P1 / X1 Slim glass riser (fixed failed to retract error)

This minimal glass riser, rise the glass lid with 4mm, which will help the bowden tube angle to be less narrow.

Creates a minimal look with a functional part.

In my case, this rise of 4mm fixed my “Failed to retract” problems with the ams of spool 3.

At the bottom of the riser there are 4 holes in each part for magnets to hold the riser in place when lifting the glass lid.

(for the front 2 parts, there are holes, but there is no metal in the printer, so only place magnets at the side and back of the printer)