Search models, users, collections, and posts
Magnetic latch for drawer or cabinet door
IP Report
Print Profile(1)
0.16mm layer, 2 walls, 15% infill
Designer
24 min
1 plate
Open in Bambu Studio
Boost
26
97
1
0
28
15
Released
Description
Content has been automatically translated.
A simple magnetic latch for 5mm magnetic cubes.
The opening for the magnets becomes narrower in depth, so the magnets must be pushed in with a tool (e.g., Allen key) until they are firmly clamped. A hole for pushing them out again is provided.
Required:
5mm magnetic cubes (2 per clip)
Washers as a magnetic counterpart (shown in pictures → 17.7mm)
Suitable screws with a maximum thickness of 4mm (shown in pictures → 3.5mm x 15mm)
There are no special printing requirements.
An assembly example can be seen in the pictures.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (1)