Electric Water Spray Pistol by 3DPDLV (G18)
Print Profile(1)
Bill of Materials
Description
Assembly videos can be found here on Youtube
---
Only thing you need for this electric water spray pistol is the Electric Water Spray Kit 02 from BambuLab Maker Supply (see below)
Everything else is 3D Printed! I used PLA Matte White for the base color, PLA Basic Blue for the secondary color & PLA GLOW Blue for the night sights.
---
No glue. No epoxy. No extra hardware.
---
Phillips screwdriver and 2mm allen key (the that comes with your printer) are required for assembly.
---
Disclaimer: Not all printers will print the same. I used the BambuLab X1-Carbon to make this water pistol, and it is virtually leak-proof. However, not everyone will be using the same printer, settings, filament etc. That being said, be careful with how you handle water around electronics. It is recommended to use the 3MF file that I designed to achieve best results. This is not a beginner print/project.
---
Everything was printed in 0.20mm layers
Everything was printed in a 15% infill except the Magazine and the Magazine Screw Cap, these were printed at 100% infill.
Everything was printed using tree supports.
---
Designed using Fusion, helped from model maker “rayx_dna_xem”
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (89)