Glowing Ghosts!
Print Profile(10)
Bill of Materials
Description
A selection of Halloween ghosts that use LED tea lights to glow.
Short Models (100mm Tall)
- Scary Ghost
- Spooky Ghost
- Happy Ghost
- Blank Ghost - Design your own face! (.f3d and .stl included)
Large Models (150mm Tall)
- Scary Ghost
- Spooky Ghost
- Blank Ghost - Design your own face! (.f3d and .stl included)
Most tea lights have a 38mm (1.5in) diameter. The openings in these models are slightly oversized, so most (if not all) tea lights will fit. Just turn on the LED and set your ghost on top.
If you are worried about getting lights that fit, these are the tea lights that I used.
Check out my other holiday models here.
Print Settings
These have all been designed to print with 2 perimeters and require no infill. Some overhangs in the mouth and eyes require good cooling.
The following filaments were used in the pictures above:
- Sunlu PLA White
Membership
Are you looking for a Commercial License for all JamesThePrinter models?
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (748)