Bed for Dummy 13

Bed for Dummy 13

This is part of a series, you can find more on my profile

https://makerworld.com/en/@Dariusz.D16/upload

Print Settings for Bambu Studio:

Filament Type: PLA or PETG

Layer Height: 0.2 mm (standard mode)

Nozzle Size: 0.4 mm

Wall Loops: 3 for better durability

Infill: 10–15% is enough for functional strength

Supports: No

Dummy 13 License:
Dummy 13 Version 1.0 © 2024 by Gabriel Rosiak is licensed under CC BY 4.0

License: Creative Commons Attribution (CC BY 4.0)

You are free to share, print, and sell physical prints of this model.
Attribution required – please link back to the original source: https://makerworld.com/en/@Dariusz.D16/upload