Coin Holder / Coin Vise
Print Profile(2)
Description
This is a rotatable vise for clamping coins or other round objects. Ideal for cleaning or examining them. A perfect gadget for metal detectorists to clean their finds.
Assembly:
- Remove the supports from the top plate
- Place the top plate at an angle onto the bottom plate, ensuring the scar aligns at this point.
- Press firmly on the top plate; significant pressure is required to insert the two parts.
- With a click, both parts are united and can move freely.
- Release the moving parts from the top plate by pressing the parts towards the center.
- Insert the attachments into the grooves of the moving parts
- Note: Each attachment belongs to one part, and the holes must match
- Position all moving parts, ensuring the holes align.
- Screw M3 (8mm) screws through the holes or the printed pin.
If the rings do not rotate easily, slightly unscrew the screws, rotate the rings a little, and then screw them back in.
Boost Me (for free)
If you like the model, please boost it :)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (31)