Magic Pom Pon sheep
Print Profile(1)
Description
Boost Me (for free)
A truly enchanting game for children, especially if, instead of simple pom-poms, you use my splendid sheep-shaped pom-poms found here:
https://makerworld.com/it/models/1449605-pom-pon-sheep
After printing the four sheep-shaped pom-poms, get two standard 25mm diameter magnets (it's best not to use neodymium magnets) like these:
and 2 pieces of 90cm long white nylon string.
Now you can assemble everything as shown in the following photos:
After printing everything, you can start preparing the sliding weight inside; the magnet must be well glued to its seat, it is advisable to use two-component resin. Before doing so, inside, to increase the weight, you can put anything like washers or 2-cent coins.
Then cover the outside with adhesive tape to improve smoothness and reduce noise.
Pass the string first into one of the two holes in the tube, then into the weight and finally into the second hole, then you can tie the sheep.
Now check that the distance between the two sheep is exactly 80cm!
If the distance is correct, you can put on the cap (it should stay closed by itself, but if necessary it can be fixed with hot glue)
Join the two tubes together and have fun!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (3)