Search models, users, collections, and posts
Print Profile(1)
V1.0, default settings: 0.2mm layer height, 4 perimeters, 10% infill
Designer
3 h
2 plates
Open in Bambu Studio
Boost
3
2
0
0
2
0
Released
Description
Content has been automatically translated.
A 120-type to 86-type base adapter for the Xiaomi Smart Wall Socket Pro.
Special Instructions
- The original 120-type base's internal wiring can be disregarded; this base sits entirely above the surface.
- For electrical safety, it is recommended to use PC or other insulating, high-temperature resistant materials.
- Print settings have been optimized for challenging materials.
- Note the installation orientation; the surface with the seam should be the bottom.
Installation Points
- 120-type bottom connection: uses the screws included with the socket, two (M4 long screws).
- Smart socket connection: M4 screws + nuts, two sets (screw length should be between 16 and 24 mm).
- Installation order:
- From the 120-type side, insert the nut, then insert the nut retaining pin, ensure the nut is not tilted (perpendicular to the hole).
- Install the base converter into place using the included socket screws, secure in place (seam side should be down).
- Install dust covers on the screw holes (top and bottom are slightly different, pay attention to the inclined height), do not press all the way down, a slight protrusion is sufficient.
- Wire the smart socket, insert it into the base, use your own M4 screws to tighten, and attach the cover plate.
- Complete.
License
This user content is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)