Print Profile(1)
Description
I designed these printable end-caps to convert almost any board into a sturdy, custom-length monitor riser and to double as accessory holders: the sides feature the Honeycomb Storage Wall (HSW) pattern, so any standard HSW insert can snap right in for extra storage and cable-management options.
What You’ll Need
| Item | Qty | Notes |
|---|---|---|
| Printed end pieces | 2 | Mirror the STL so you have a left and right side. |
| Board / shelf | 1 | Any straight board works; I used a 24 × 10 × 0.5 in (610 × 254 × 13 mm) shelf from Lowe’s. I wouldnt go deeper then 10in you can see in my picture it extends past the stand. |
| #6 wood screws | 6 | Length should be suitable for your board thickness |
Assembly
- Print two ends.
- Position the board between the printed sides, ensuring a flush fit.
- Pre-drill pilot holes if needed to prevent splitting.
- Secure each side with three #6 screws driven from the bottom
Your riser is now ready to elevate your monitor—and, thanks to the built-in HSW honeycomb pattern, you can clip on pen cups, USB holders, cable hooks, or any other standard insert to keep your desk tidy. If you use a different board size or hardware, let everyone know in the comments!
Boost Me (for free)
If you used and liked it please send me a boost
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)