Plusle & Minun! (Two-color printing)
Print Profile(4)
Description
Plusle and Minun are here!
The eye placement order is from top to bottom and from left to right:
Plusle left eye, Plusle right eye
Minun left eye, Minun right eye
Two options are provided: one-piece eyes and separate eyes. I recommend the one-piece eyes and printing them vertically.
(Left: flat printing, Right: vertical printing)
The body and head have a 0.2mm fuzzy effect; you can disable it if you prefer a smooth surface.
(Left: fuzzy surface, Right: smooth surface)
Due to the center of gravity issue, to make them stand, I tried 80% infill for the body and 5% for the head, but they still could not stand, so I abandoned this approach.
A 6x2mm magnet hole is reserved for each foot; you can use a base (possibly released later) to make Plusle and Minun stand.
The current method uses the tail as a support to stand.
The nose is too small to assemble; you can use a black pen to add a dot.
Lastly, due to the support surface issue, I changed the bottom to one of the cheeks. You can choose the left or right cheek as the base depending on the left-right position of Plusle and Minun.
For example, in the picture below, the model is printed according to the arrangement, using Plusle's left cheek and Minun's right cheek as the base. Placing Plusle's left cheek and Minun's right cheek together hides the flaws caused by support.
(This is the effect of using the chin as the base...)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (15)